Modifications apportées à l'étape #8
Modifié par Kari Bachman —
Modification approuvée par Kari Bachman
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] The replacement lug, shown in the photograph is a little larger than needed, but will work as well as the smaller-sized lugs used on the appliance. |
|---|---|
| - | [* black] After removing the white, green and black protective caps of the replacement cord, affix the lugs to the cord wires. |
| - | [* black] Twist the copper wiring to cleanly insert it into the lug. |
| + | [* black] Remove the white, green, and black protective caps from the replacement cord. Affix one lug to each cord wire. |
| + | [* black] Twist the copper wiring on one cord wire. Cleanly insert it into the lug. |
| [* black] Push the copper wiring into the lug, until it is slightly meshed at the top. | |
| + | [* black] Repeat the two previous steps for the other cord wires. |