Modifications apportées à l'étape #5
Modifié par Randy Fromm —
Modification approuvée par Randy Fromm
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Make note of how the wires are connected to the components. |
|---|---|
| + | [* black] Make note of how the wires are connected to the components to aid reassembly. |
| [* black] Then remove the connectors (spaded lugs) from the circuit components as shown in the second image. | |
| - | [* black] ''You should be able to remove the connectors by hand by pinching the lug between your fingers and pulling in the direct of the wire. DO NOT pull on the wire as you might pull it out of the connector.'' |
| + | [* icon_caution] ''DO NOT pull on the wires as you might pull them out of the connectors.'' |
| + | [* black] You should be able to remove the connectors easily by hand by pinching the lug between your fingers and pulling in the direction of the attached wire.. |
| + | [* black] If necessary, you can you needle-nose pliers to grasp the lug shank firmly and then gently pull the lug in the direction of the attached wire. |
| + | [* black] Gently bend the disconnected wires back and out of the work area. |