Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #5

Modifié par Kari Bachman —

Modification approuvée par Kari Bachman

Avant
Après
Inchangé

Lignes de l'étape

[* black] Make note of how the wires connect to the components to aid reassembly.
-[* black] Then remove the connectors (spaded lugs) from the circuit components as shown in the second image.
+[* black] Remove the connectors (spaded lugs) from the circuit components as shown in the second image.
[* icon_caution] ''DO NOT pull on the wires as you might pull them out of the connectors.''
-[* black] You should be able to remove the connectors easily by hand by pinching the lug between your fingers and pulling in the direction of the attached wire..
-[* black] If necessary, you can you needle-nose pliers to grasp the lug shank firmly and then gently pull the lug in the direction of the attached wire.
+[* black] You should be able to remove the connectors easily by hand. Pinch the lug between your fingers and pull in the direction of the attached wire.
+[* black] If necessary, use needle-nose pliers to grasp the lug shank firmly. Gently pull the lug in the direction of the attached wire.
[* black] Gently bend the disconnected wires back and out of the work area.