Modifications apportées à l'étape #5
Modifié par Kari Bachman —
Modification approuvée par Kari Bachman
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Make note of how the wires connect to the components to aid reassembly. | |
| [* black] Remove the connectors (spaded lugs) from the circuit components as shown in the second image. | |
| - | [* icon_caution] ''DO NOT pull on the wires as you might pull them out of the connectors.'' |
| + | [* icon_caution] ''DO NOT pull on the wires as you might pull them out of the connectors.'' |
| [* black] You should be able to remove the connectors easily by hand. Pinch the lug between your fingers and pull in the direction of the attached wire. | |
| [* black] If necessary, use needle-nose pliers to grasp the lug shank firmly. Gently pull the lug in the direction of the attached wire. | |
| [* black] Gently bend the disconnected wires back and out of the work area. |