Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #4

Modifié par Kari Bachman —

Modification approuvée par Kari Bachman

Avant
Après
Inchangé

Lignes de l'étape

[* black] Now that you have removed the bottom from the kettle, identify all of the parts. The YELLOW arrows point to the posts for mounting the control circuit components. The RED arrows point to the following parts:
-[* black] A - the power supply.
-[* black] B - the Boil Dry switches; there are two (2) of them, one on either side of the central black ring.
-[* black] C - the power coupling, that plugs into the baseplate when you place the kettle on it.
-[* black] D - the thermostat (the little metal ring, half hidden by the switch cover).
-[* black] E - the manual ON/OFF switch.
-[* black] F - the indicating light.
-[* black] G - the 'steam chamber' that heats the thermostat to turn the kettle off automatically.
+[* black] A: The power supply.
+[* black] B: The two Boil Dry switches, one on either side of the central black ring.
+[* black] C: The power coupling. This fits into the baseplate when you place the kettle on it.
+[* black] D: The thermostat. This is a little metal ring, half hidden by the switch cover.
+[* black] E: The manual ON/OFF switch.
+[* black] F: The indicator light.
+[* black] G: The steam chamber. This heats the thermostat, which turns off the kettle automatically.