Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #7

Modifié par Kari Bachman —

Modification approuvée par Kari Bachman

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Using the wire that is still connected to the power supply, carefully lift the power supply off of the threaded stud to which it was coupled.
-[* black] At this point you should have three pieces removed from the kettle:
- [* black] one (1) 7/32 hex nut (left red circle)
- [* black] one (1) 7/32" split-ring lock washer (right red circle)
- [* black] one (1) power supply unit (red arrow) with wire attached. The wire can be removed and placed on the replacement component prior to reassembly.
+[* black] Grasping the wire that is still connected to the power supply, carefully lift the power supply off the threaded stud to which it was coupled.
+[* black] At this point you will have removed three pieces from the kettle:
+ [* black] One (1) 7/32' hex nut.
+ [* black] One (1) 7/32" split-ring lock washer.
+ [* black] One (1) power supply unit.