Modifications apportées à l'étape #1
Modifié par Randy Fromm —
Modification approuvée par Randy Fromm
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] FIRST IMAGE: After removing the power supply, and with the kettle handle to your right, use the 7/32" nut driver to remove the 7/32" nut from the stud clockwise from where the power supply was attached. |
| + | [* black] Use tweezers to remove the split-ring lock washer that was under the nut. |
| + | [* black] SECOND IMAGE: Roll the kettle so that the handle is now on the left. Use the 7/32" nut driver to remove the 7/32" nut from the final stud, now anti-clockwise from where the power supply was attached. |
| + | [* black] Use tweezers to remove the split-ring lock washer that was under the nut. |