Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #1

Modifié par Kari Bachman —

Modification approuvée par Kari Bachman

Avant
Après
Inchangé

Lignes de l'étape

-[* black] FIRST IMAGE: After removing the power supply, and with the kettle handle to your right, use the 7/32" nut driver to remove the 7/32" nut from the stud clockwise from where the power supply was attached.
-[* black] Use tweezers to remove the split-ring lock washer that was under the nut.
-[* black] SECOND IMAGE: Roll the kettle so that the handle is now on the left. Use the 7/32" nut driver to remove the 7/32" nut from the final stud, now anti-clockwise from where the power supply was attached.
-[* black] Use tweezers to remove the split-ring lock washer that was under the nut.
+[* black] FIRST IMAGE: Remove the power supply. Align the kettle as shown, with the handle to your right. Use the 7/32" nut driver to remove the 7/32" nut from the stud clockwise from where the power supply was attached.
+[* black] Use tweezers to remove the split-ring lock washer located under the nut.
+[* black] SECOND IMAGE: Roll the kettle over so the handle is now on your left. Use the 7/32" nut driver to remove the 7/32" nut from the final stud, now anti-clockwise from where the power supply was attached.
+[* black] Use tweezers to remove the split-ring lock washer located under the nut.