Modifications apportées à l'étape #1
Modifié par Kari Bachman —
Modification approuvée par Kari Bachman
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] FIRST IMAGE: Remove the power supply. Align the kettle as shown, with the handle to your right. Use the 7/32" nut driver to remove the 7/32" nut from the stud clockwise from where the power supply was attached. |
|---|---|
| + | [* black] FIRST IMAGE: Remove the power supply. Align the kettle as shown, with the handle to your right. Use the 7/32" nut driver to remove the 7/32" nut from the stud that is located clockwise from where the power supply was attached. |
| [* black] Use tweezers to remove the split-ring lock washer located under the nut. | |
| - | [* black] SECOND IMAGE: Roll the kettle over so the handle is now on your left. Use the 7/32" nut driver to remove the 7/32" nut from the final stud, now counter-clockwise from where the power supply was attached. |
| + | [* black] SECOND IMAGE: Roll the kettle over so the handle is now on your left. Use the 7/32" nut driver to remove the 7/32" nut from the final stud, which is now located counter-clockwise from where the power supply was attached. |
| [* black] Use tweezers to remove the split-ring lock washer located under the nut. |