Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par iRobot

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Grasp the logic board at the left edge with one hand and at the thinnest section with the other hand. Lift the left edge of the board up to approximately a 30 degree angle (if you don't have your protractor handy, just lift until the DVI port clears the right hinge).
[* black] Once the logic board clears the ports, slide it out to the left.

Image 1

Aucune image précédente

Ajouté(e)