Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Walter Galan

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* icon_note] The following procedure allows the changing of the rear display bezel without removing the display assembly from the computer. Do not attempt to rotate the display back farther than the hinges allow or your computer may be damaged.
[* black] Open the computer with the display facing you and rotate the display back as far as possible.
[* red] Remove the T6 Torx screw from the bottom left corner of the display assembly. The computer casing will not allow the screwdriver to be inserted directly into the screw, so be careful not to strip the screw.

Image 1

Aucune image précédente

Ajouté