Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Andrew Bookholt

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Use a spudger to begin separatingInsert an iPod opening tool between the two halvesleft edge of the front display assembly. Slidebezel and the spudger between the gray plastic strip andattached to the rear bezel, with the edge of the tool angled toward the LCD.
[* black] Rotate the tool away from the LCD to pop the rear bezel off the tabs on
the metal front display bezel.
[* black]
Work up and down along the left edge to freeof the three tabs alongdisplay until the left edgerear bezel is evenly separated from the front bezel.
[* black] Use a spudger to begin separatingInsert an iPod opening tool between the two halvesleft edge of the front display assembly. Slidebezel and the spudger between the gray plastic strip andattached to the rear bezel, with the edge of the tool angled toward the LCD.
[* black] Rotate the tool away from the LCD to pop the rear bezel off the tabs on
the metal front display bezel.
[* black]
Work up and down along the left edge to freeof the three tabs alongdisplay until the left edgerear bezel is evenly separated from the front bezel.
[* icon_note] Freeing these tabs may require some force. Be sure to support the display assembly with your other hand to avoid putting too much strain on the hinges.