Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Andrew Bookholt

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Continue freeingInsert an iPod opening tool between the right edge of the front display bezel and the plastic strip attached to the rear bezel, with the edge of the tool angled toward the LCD.
[* black] Rotate the tool away from the LCD to pop the rear bezel off the
tabs on the front display bezel.
[* black] Work
along the topright edge of the display assembly. There are four tabs that must be released along this edgeuntil the rear bezel is evenly separated from the front bezel.
[* black] Continue freeingInsert an iPod opening tool between the right edge of the front display bezel and the plastic strip attached to the rear bezel, with the edge of the tool angled toward the LCD.
[* black] Rotate the tool away from the LCD to pop the rear bezel off the
tabs on the front display bezel.
[* black] Work
along the topright edge of the display assembly. There are four tabs that must be released along this edgeuntil the rear bezel is evenly separated from the front bezel.