Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par David Hodson

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Insert an iPoda plastic opening tool between the right edge of the front display bezel and the plastic strip attached to the rear bezel, with the edge of the tool angled toward the LCD.
[* black] Insert an iPoda plastic opening tool between the right edge of the front display bezel and the plastic strip attached to the rear bezel, with the edge of the tool angled toward the LCD.
[* black] Rotate the tool away from the LCD to pop the rear bezel off the tabs on the front display bezel.
[* black] Work along the right edge of the display until the rear bezel is evenly separated from the front bezel.