Aller au contenu principal

Modifications apportées à l'étape #5

Modifié par Andrew Bookholt

Validation en attente


Lignes de l'étape

[* black] Insert a spudger just to the left of the hinge opening on the top edge of the display between the front display bezel and the plastic strip attached to the rear bezel.
[* black] Pry the rear bezel away from the front bezel along the top left half of the display.
[* icon_note] If the flat end of your spudger is flexing too much, trim about .125" of the end to increase its stiffness.