Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Andrew Bookholt

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* icon_note] There are two cables connecting the rear display bezelblack] Insert a spudger just to the restleft of the computer, so use caution when removinghinge opening on the top edge of the display between the front display bezel and the plastic strip attached to the rear bezel.
[* black] After freeing all the tabs,Pry the rear display bezel should rotate away from the front bezel along the top right half of the display.
[* icon_note] To release the clips in the far left and right corners of the display, it may be necessary to run a spudger parallel to the face of
the display assembly easily. Ifalong the reartop edge of the front display bezel doesn't immediately come free, make sure that alland force it into the tabs holdingcorners to pop the two halves together have been freedrear bezel off.
[* icon_note] There are two cables connecting the rear display bezelblack] Insert a spudger just to the restleft of the computer, so use caution when removinghinge opening on the top edge of the display between the front display bezel and the plastic strip attached to the rear bezel.
[* black] After freeing all the tabs,Pry the rear display bezel should rotate away from the front bezel along the top right half of the display.
[* icon_note] To release the clips in the far left and right corners of the display, it may be necessary to run a spudger parallel to the face of
the display assembly easily. Ifalong the reartop edge of the front display bezel doesn't immediately come free, make sure that alland force it into the tabs holdingcorners to pop the two halves together have been freedrear bezel off.