Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Andrew Bookholt

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Insert a spudger just to the leftright of the hinge opening on the top edge of the display between the front display bezel and the plastic strip attached to the rear bezel.
[* black] Insert a spudger just to the leftright of the hinge opening on the top edge of the display between the front display bezel and the plastic strip attached to the rear bezel.
[* black] Pry the rear bezel away from the front bezel along the top right half of the display.
[* icon_note] To release the clips in the far left and right corners of the display, it may be necessary to run a spudger parallel to the face of the display along the top edge of the front display bezel and force it into the corners to pop the rear bezel off.