Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Sandy Jewell

Modification approuvée par Sandy Jewell

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Flip the laptop back over, and open itthe display.
[* red] RemoveUse a Phillips #1 screwdriver to remove the 6six 5.5 mm screws (5.5 mm) on the inside covering.
[* black] Disconnect the touch pad ribbon cable. It It is visible through a window atlocated 3 inches from the bottom left edge of the metal part of the top casing and approximately 1/4 from the left edgecovering.
[* icon_note] In these photos theThe connector shows blue.
[* black] Flip the laptop back over, and open itthe display.
[* red] RemoveUse a Phillips #1 screwdriver to remove the 6six 5.5 mm screws (5.5 mm) on the inside covering.
[* black] Disconnect the touch pad ribbon cable. It It is visible through a window atlocated 3 inches from the bottom left edge of the metal part of the top casing and approximately 1/4 from the left edgecovering.
[* icon_note] In these photos theThe connector shows blue.