Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #3

Modifié par Emmerie —

Modification approuvée par Emmerie

Avant
Après
Inchangé

Lignes de l'étape

-[* icon_caution] There is a ribbon cable attached to the back of the keyboard. Avoid lifting or moving the keyboard more than a couple inches before you disconnect the ribbon cable, or you may damage the cable.
+[* icon_caution] A ribbon cable is attached to the back of the keyboard. Avoid lifting or moving the keyboard more than a couple inches before you disconnect the ribbon cable or you may damage it.
[* black] Carefully pry up one of the top corners of the keyboard with a prying tool. Slide the tool along the top of the keyboard to release it from the housing. Pull the top of the keyboard towards you an inch or two.
-[* icon_note] The keyboard may make some cracking noises as you pry it from the casing. This is normal and expected.
-[* black] Pull the keyboard up and away from you, as it is held in by clips in the front.
+[* icon_note] The keyboard may make some cracking noises as you pry it from the casing. This is expected.
+[* black] Pull the keyboard up and away from you, as it is held in by clips in the front, it is not yet disconnected.