Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Devin Mast

Modification approuvée par Devin Mast

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Firmly holding the Gear, insert the pointed flat side spudger at an angle to pry the back casing off of the device.
+[* black] Firmly holding the Gear, insert the flat side of the spudger at an angle to pry the back casing off of the device.
[* black] After inserting the spudger, move the flat end of the tool along the sides of the Gear to completely detach the back and front components.
[* black] Pry the device open from the other side also if it does not fully disassemble from one side.