Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Allison Michel

Modification approuvée par Allison Michel

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Firmly holding the Gear, insert the flat side of the spudger at an angle to pry the back casing off of the device.
-[* black] After inserting the spudger, move the flat end of the tool along the sides of the Gear to completely detach the back and front components.
+[* black] Firmly holding the Gear, insert the flat side of the spudger at an angle to pry the back casing off of the device. Move the spudger along the sides of the Gear to completely detach the back and front components.
[* black] Pry the device open from the other side also if it does not fully disassemble from one side.