Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par John Thress

Validation en attente

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* icon_note] NOTE: This picture identifies the process required to release the electrical ribbons but not the proper location for this step.
[* black] This step applies to the larger electrical ribbon connecting the LCD screen and circuit board.
[* black] Using a spudger, wedge the flat tipped end between the black bar and the circuit board.
[* black] FlipCarefully flip up black barbar into vertical position.
[* black] Using a spudger, wedge the flat tipped end between the black bar and the circuit board.
[* black] FlipCarefully flip up black barbar into vertical position.