Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Norman Tran

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* black] After the removal of all screws on the back, the cover will raise from the phone due to spring tension.
[* icon_caution] DO NOT lift the cover straight off. There is a flex cable connecting it to the main logic board.
-[* black] Grab the cover at the bottom and flip it as shown in the picture. Be careful not to break the ribbon cable.
+[* black] Gently take the cover at the bottom and flip it as shown in the picture. Be careful not to break the ribbon cable.