Modifications apportées à l'étape #10
Modifié par PJ Blank —
Modification rejetée par Andrew Optimus Goldheart
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Removing the motherboard requires disconnecting several connectors. | |
| [* black] Being as careful as we possibly could be, we use an [product|IF145-185|iFixit Tech Knife|new_window=true] (more commonly known as a K-nife) to detach the rocker buttons from the side of the panel assembly. | |
| [* icon_reminder] As much as we love [guide|7048|using knives to cut into devices|stepid=29881|new_window=true], we heavily advise against it in most cases. | |
| + | [* black] At bottom left (near the power switch), there is one screw that needs to be removed before the motherboard is free. It is the black dot in the main picture of this step. |
| + | [* black] Note that there are AFAIK exactly 2 different screw types in this phone, and this is the 2nd one. There are only 3 of these screws; the other two are the ones under the rubber plugs in the speaker assembly (see step 15). |