Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Henry H

Modification approuvée par Henry H

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Pull off the brew-group.
-[* black] First unscrew the holder of the white hose. The PH1 Screwdriver fits well. One screw is located behind & under the holder.
+[* black] Remove the the brewgroup from the machine by simultaneously pressing the "Push" bar and pulling towards you.
+[* black] Using your phillips screwdriver, remove the two screws holding the grey bracket and white hose in place.