Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Richdave

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Pin 1 is assumedAfter removing the front bezel, you need to beremove the pin with8ea 12mm T8 screws around the little dot nest to itperimeter of the LCD
[* icon_caution] Rotate the iMac so the TOP EDGE is facing you and GENTLY lift the LCD up about 75mm (3in) and prop uop the LCD with something NON CONDUCTIVE.
[* black] Pin 1 is assumedAfter removing the front bezel, you need to beremove the pin with8ea 12mm T8 screws around the little dot nest to itperimeter of the LCD
[* icon_caution] Rotate the iMac so the TOP EDGE is facing you and GENTLY lift the LCD up about 75mm (3in) and prop uop the LCD with something NON CONDUCTIVE.

Image 1

Ancienne version

Nouvelle version

Image 2

Aucune image précédente

Ajouté(e)