Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Richdave

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] After removing the front bezel, you need to remove the 8ea 12mm T8 screws around the perimeter of the LCD
[* icon_caution] Rotate the iMac so the TOP EDGE is facing you and GENTLY lift the LCD up about 75mm (3in) and prop up the LCD with something NON CONDUCTIVE.
[* icon_caution] Lifting the LCD exposes the rear of the PSU. When powered up there is MAINS VOLTAGE on this board