Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #10

Modifié par Nicolas Siemsen

Modification approuvée par Nicolas Siemsen

Avant
Après
Inchangé

Lignes de l'étape

[* black] Slip the clamps over the new hose.
[* black] Then install the new hose fully over both of the connections - one at the power steering pump reservoir and the other down at the steering box.
[* black] Tighten the clamps to finish the installation.
[* black] At this time you may want to consider using some de-greaser to clean up the driver's side motor mount and the engine cross-member as they will be covered in power steering fluid. The oil may lead to premature failure of that motor mount, in particular.

Image 1

Aucune image précédente

Ajouté