Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par iRobot

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Remove the single black Torx screw that fastens the display cable to the plastic casing.
[* black] Grasp the thin display inverter board at its left end; lift up and rotate toward yourself.
[* icon_note] There are two tabs that hold the display inverter in place; these are what you need to get past in order to pull the board free.

Image 1

Aucune image précédente

Ajouté(e)