Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Oliver Myers

Modification approuvée par Oliver Myers

Avant
Après
Inchangé

Lignes de l'étape

[* icon_caution] Keep laptop sitting on table to avoid dropping it and causing irreparable damage.
[* black] Open Laptop.
-[* black] Using a Phillips screwdriver, remove power panel screw located on the left side of the laptop. See red box in photo for screw location.
-[* black] To remove power panel, slide it to the right and gently lift upwards.
-[* black] Gently detach power panel ribbon from the motherboard by sliding the ribbon out of plastic connector keeping it attached to power panel.
+[* black] Using a Phillips screwdriver, remove the power panel screw located on the left side of the laptop. See the red box in the photo for the location of the screw.
+[* black] To remove the power panel, slide it to the right and gently lift it upwards.
+[* black] Gently detach the power panel ribbon from the motherboard by sliding the ribbon out of the plastic connector, meanwhile keeping it attached to the power panel.