Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #1

Modifié par Andrew Bookholt —

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Insert the flat end of a spudger between the thin rubber strip surrounding the front display bezel and the rear display bezel.
[* icon_caution] ***Do not*** try to insert the spudger between the thin rubber strip and the plastic face of the front display bezel.
[* black] Use the flat end of your spudger to carefully pry the front display bezel away from the adhesive securing it to the rear display bezel.
-[* icon_caution] Do not pry against the fragile glass LCD panel. Also, do not excessively bend the plastic, as it may permanently deform.
+[* icon_caution] Do not pry against the fragile glass LCD panel. Also, do not excessively bend the plastic as it may permanently deform.
[* black] Continue prying until the front display bezel is free along the right side of the display and behind the right clutch hinge.