Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Andrew Bookholt

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Use your spudger to pry the left side of the front display bezel away from the display assembly.
[* black] Carefully pry up the area behind the left clutch hinge.
+[* icon_reminder] During reassembly, be sure the small plastic pegs on the front display bezel mate up with the holes in the rear display bezel (shown in red). Failure to do so will prevent the front display bezel from sitting flush against the rear bezel.

Image 1

Ancienne version

Nouvelle version