Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #2

Modifié par David Hodson

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Unscrew two screws from the metal retainer at the bottom of the iPod:
[* red] 4.4 mm angled Phillips screw
[* yellow] 5.4 mm Phillips screw.
[* icon_note] Even if they are loose, the screws may not come out on their own. Be sure not to lose the screws when removing the retainer.
[*
black] Use an iPoda plastic opening tool to pry the click wheel connector off the logic board.
[* black] Remove the click wheel
metal retainer out from the Nanobottom of the iPod and remove it.
[* black] Unscrew two screws from the metal retainer at the bottom of the iPod:
[* red] 4.4 mm angled Phillips screw
[* yellow] 5.4 mm Phillips screw.
[* icon_note] Even if they are loose, the screws may not come out on their own. Be sure not to lose the screws when removing the retainer.
[*
black] Use an iPoda plastic opening tool to pry the click wheel connector off the logic board.
[* black] Remove the click wheel
metal retainer out from the Nanobottom of the iPod and remove it.

Image 1

Ancienne version

Nouvelle version

Image 2

Ancienne version

Nouvelle version

Image 3

Aucune image précédente

Ajouté