Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Brett Hartt

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* icon_note] Orient the Xbox 360 S so that the hard drive port is facing up and the front panel is facing to the left.
[* black] Insert a metal spudger between the black bottom vent and the silver rim of the bottom bezel, in the rear right corner of the vent.
-[* black] Rotate the spudger away from the console, prying the vent away from the bottom bezel.
+[* black] Rotate the spudger away from the console, prying the vent up from the bottom bezel.
[* icon_note] Be sure to rotate the spudger far enough so that the clips on the vent are lifted past the silver rim of the bottom bezel.