Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Brett Hartt

Validation en attente

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* blackicon_note] Turn the logic board assembly over to access the heat sink's x-clamp.
[* blackicon_note] Turn the logic board assembly over to access the heat sink's x-clamp.
[* icon_note] To avoid ESD damage, be sure to lay your logic board on a soft, static free surface during service.
[* black] Starting at the front left corner of the x-clamp, insert a 1.5 flathead screwdriver between the heat-sink's peg and the x-clamp's hook.
[* black] Gently rotate the screwdriver counterclockwise, releasing the x-clamp's hook from the peg.
[* icon_caution] The logic board is very sensitive to impact and scratching. Be sure to not let the screwdriver slip and damage the logic board.