Aller au contenu principal

Modifications apportées à l'étape #5

Modifié par Matthew Newsom

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* icon_note] Using one hand to hold the heat sink in place, carefully turn the logic board over.
+[* black] Using one hand to hold the heat sink in place, carefully turn the logic board over.
[* black] Remove the heat sink.
-[* icon_reminder] Prior to installation, be sure to coat the contact points of the heat sink and processor with [guide|744|thermal paste].
+[* icon_reminder] Before reinstallation, follow our [guide|744|thermal paste guide] to replace the thermal compound between the heat sink and processor.