Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #1

Modifié par Andrew Bookholt

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Disconnect the two antenna cables from the Airport Extreme card, the iSight and inverter cables from the left side of the logic board, and the display data cable from the right side of the logic board.
[* icon_reminder] The Airport Extremeblack] For A1229 models, disconnect the three antenna cable withcables from the gray shielding attaches toAirPort Extreme card and the three connectors highlighted on the logic board.
[* black] Carefully peel the iSight and inverter cables off the top of
the left side connector, whilefan and de-route the cable withAirPort antenna cables from the white shielding attaches tochannel in the right sideleft speaker.
[* icon_reminder] The Airport Extremeblack] For A1229 models, disconnect the three antenna cable withcables from the gray shielding attaches toAirPort Extreme card and the three connectors highlighted on the logic board.
[* black] Carefully peel the iSight and inverter cables off the top of
the left side connector, whilefan and de-route the cable withAirPort antenna cables from the white shielding attaches tochannel in the right sideleft speaker.

Image 2

Aucune image précédente

Ajouté