Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Brett Hartt

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Insert the edge of a spudger in between the trigger and the trigger assembly onnear the left side of the trigger, pryingedge. Pry the housing away from the catch on the trigger.
[* black] In a similar mannerUsing the previously described technique, pry the trigger housing on the right side of the triggeredge away from the catch on that sidetrigger.
[* black] Insert the edge of a spudger in between the trigger and the trigger assembly onnear the left side of the trigger, pryingedge. Pry the housing away from the catch on the trigger.
[* black] In a similar mannerUsing the previously described technique, pry the trigger housing on the right side of the triggeredge away from the catch on that sidetrigger.
[* black] Rotate the trigger away from the logic board, past its housing.