Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Jonathan

Modification approuvée par Jonathan

Avant
Après
Inchangé

Lignes de l'étape

[* black] Prerequisite step: Back panel removal
-[* red] Use the T4 torx screwdriver to remove the screw fastened to the metal clip, holding the battery in place.
-[* black] This screw is 3mm long and 1.5mm for the head's diameter.
+[* red] Use the T4 torx screwdriver to remove the 3mm screw (diameter of the head is 1.5mm) fastened to the metal clip, holding the battery in place.