Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #1

Modifié par Andrew Bookholt —

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Use the flat end of a spudger to release the clips securing the power button shield along the top and the left edge of the power button board.
-[* black] Lift and remove the power button shield from the console.
+[* black] Use the flat end of a spudger to release the clips securing the plastic RF Module shield along the top and the left edge of the power button board.
+[* black] Lift and remove the RF Module shield from the console.