Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #2

Modifié par Andrew Garris

Modification approuvée par Andrew Garris


Lignes de l'étape

[title] Lifting Circuit Board out of Front Case
[* black] Use a plastic pry tool (or a credit card) to gently lift the circuit board up and remove it from the front plastic case.
[* black] Use caution when lifting the board as the speaker is attached to the board and will come out with it.
[* black] The speaker has two components: 1. one is connected to the circuit board (this is the one we are replacing) 2. the other part of the speaker is connected to the front plastic case and should not be removed. This piece may come out a little bit in this step, but make sure it stays in place before re-assembly.