Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #3

Modifié par Kelsea Weber

Modification approuvée par Kelsea Weber

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* black] The speaker is connected tored] Desolder the main board by two soldered wires. The locations of the each soldered wire are circled in red on the image to the left.
[* black] De-solder the
wires toconnecting the old speaker and set it aside.
[* black] Solder
to the wires onto the new speaker.
[* icon_note] The polarity (+ or –) of the wires is not important, so it is okay if you swap them
motherboard.
[* black] The speaker is connected tored] Desolder the main board by two soldered wires. The locations of the each soldered wire are circled in red on the image to the left.
[* black] De-solder the
wires toconnecting the old speaker and set it aside.
[* black] Solder
to the wires onto the new speaker.
[* icon_note] The polarity (+ or –) of the wires is not important, so it is okay if you swap them
motherboard.

Image 1

Ancienne version

Nouvelle version

Image 2

Ancienne version

Nouvelle version