Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #3

Modifié par bushing

Validation en attente

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* black] The speaker is only connected to the circuitmain board viawith two soldered wires. Replacing is fairly simple.
[* black] All that need be done is removeTo replace the speaker, desolder the wires from the old speakerone and solder in a new one. Make sure that the correct speaker is used(Model # and make are printedthem on to the outside). As only a certain amountnew speaker. The polarity of electricitythe wires is allocated for usenot important, so it's okay if you swap them.
[* black] The speaker is only connected to the circuitmain board viawith two soldered wires. Replacing is fairly simple.
[* black] All that need be done is removeTo replace the speaker, desolder the wires from the old speakerone and solder in a new one. Make sure that the correct speaker is used(Model # and make are printedthem on to the outside). As only a certain amountnew speaker. The polarity of electricitythe wires is allocated for usenot important, so it's okay if you swap them.