Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #3

Modifié par Andrew Garris

Modification approuvée par Andrew Garris

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* redgreen] The speaker is connected to the main board withby two soldered wires. The location on the circuit board is highlighted in the image on the left.
[* violet] Togreen] Before you can replace the speaker, you must desolder the wires fromconnected to the old one andspeaker. You can now solder themthe wires on to the new speaker. The polarity (+ or -) of the wires is not important, so it'sit is okay if you swap them.
[* redgreen] The speaker is connected to the main board withby two soldered wires. The location on the circuit board is highlighted in the image on the left.
[* violet] Togreen] Before you can replace the speaker, you must desolder the wires fromconnected to the old one andspeaker. You can now solder themthe wires on to the new speaker. The polarity (+ or -) of the wires is not important, so it'sit is okay if you swap them.