Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #3

Modifié par Oneika White

Modification approuvée par Kristen Gismondi

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[title] Wires and Soldering
[* black] The speaker is connected to the main board by two soldered wires. The location on the circuit board is highlightedlocations of the each soldered wire are circled in red on the image onto the left.
[* black] Before you can replace the speaker, you must desolderDe-solder the wires connected to the old speaker. You can now solderspeaker and set it aside.
[* black] Solder
the wires on toonto the new speaker. The
[* icon_note] The
polarity (+ or -) of the wires is not important, so it is okay if you swap them.
[* black] The speaker is connected to the main board by two soldered wires. The location on the circuit board is highlightedlocations of the each soldered wire are circled in red on the image onto the left.
[* black] Before you can replace the speaker, you must desolderDe-solder the wires connected to the old speaker. You can now solderspeaker and set it aside.
[* black] Solder
the wires on toonto the new speaker. The
[* icon_note] The
polarity (+ or -) of the wires is not important, so it is okay if you swap them.