Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #3

Modifié par Oneika White

Modification approuvée par Kristen Gismondi

Avant
Après
Inchangé

Lignes de l'étape

[title] Wires and Soldering
[* black] The speaker is connected to the main board by two soldered wires. The locations of the each soldered wire are circled in red on the image to the left.
[* black] De-solder the wires to the old speaker and set it aside.
[* black] Solder the wires onto the new speaker.
[* icon_note] The polarity (+ or -) of the wires is not important, so it is okay if you swap them.
[* icon_note] The polarity (+ or -) of the wires is not important, so it is okay if you swap them.