Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Walter Galan

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Remove the two 1.6 mm Phillips screws securing the shield covering the hard drive cable connector.
+[* black] Remove the following four screws securing the hard drive cable assembly to the upper case:
+ [* red] Two 1.6 mm Phillips screws securing the shield that covers the hard drive cable connector.
+ [* orange] Two 2.2 mm Phillips screws securing the hard drive cable connector to the upper case.
[* black] Remove the shield from the logic board.

Image 1

Ancienne version

Nouvelle version