Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #3

Modifié par R Trent —

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Holding the drive top up, gently pull the top half up from the bottom half. The back will rotate up as the front is connected by two plastic clips.
[* red] These clips are most easily undone by rotating the top enclosure to about 30º then lifting it up firmly.
-[* icon_note] Be careful to not let it jerk violently during separation. Once the top is removed, there isn't much of anything holding the latch assembly in place. It would be a bummer to lose the spring, though getting the latch assembly back in place if it comes out is not too difficult, just don't lose the spring.
+[* icon_note] Be careful to not let it jerk violently during separation. Once the top is removed, there isn't much of anything holding the latch mechanism in place. It would be a bummer to lose the spring, though getting the latch assembly back in place if it comes out is not too difficult, just don't lose the spring.