Aller au contenu principal

Modifications apportées à l'étape #10

Modifié par kkazkaz

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Use a firm plastic edge to scrape the thermal material off the processor.
[* icon_reminder] When replacing the logic board, make sure all cables are routed around and above - not under - it, and to connect the two cables that do go beneath before pushing the board into place. Remember that there are the 13 cables from step 15 as well as the modem cable from step 14.
[* icon_reminder] When replacing the logic board, make sure all cables are routed around and above - not under - it, and to connect the two cables that do go beneath before pushing the board into place. Remember that there are the 13 cables from step 15 as well as the modem cable from step 14.
[* icon_reminder] Place the logic board back in the computer, trying not to move it around once the processor has come into contact with the newly-applied thermal paste.