Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #2

Modifié par Brett Hartt

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Insert wisdom hereUsing the flat end of a spudger, pry the left speaker out of its socket on the front bezel.
[* black] De-route the speaker cable along the top edge of the screen.
[* icon_caution] Work carefully and slowly, holding onto the wire and not the speaker itself. The solder joints may break if pulled on too hard.
[* black] In the same manner described above, remove the right speaker from its socket on the front bezel.
[* black] Place both speakers on the back of the upper LCD
.
[* black] Insert wisdom hereUsing the flat end of a spudger, pry the left speaker out of its socket on the front bezel.
[* black] De-route the speaker cable along the top edge of the screen.
[* icon_caution] Work carefully and slowly, holding onto the wire and not the speaker itself. The solder joints may break if pulled on too hard.
[* black] In the same manner described above, remove the right speaker from its socket on the front bezel.
[* black] Place both speakers on the back of the upper LCD
.

Image 1

Ancienne version

Nouvelle version

Image 2

Ancienne version

Nouvelle version

Image 3

Aucune image précédente

Ajouté